The RELIANCE doctoral network is funded by the EUROPEAN RESEARCH EXECUTIVE AGENCY (REA), via the Marie Skłodowska-Curie Actions HORIZON-MSCA-2021-DN-01. Project no: 101073040
Partners
|
Technical University of Denmark (Coordinator) |
Prof. Jens Wentzel Andreasen |
DK |
|
Leiden University |
Prof. Joost Batenburg |
NL |
|
Chalmers University of Technology |
Prof. Leif Asp |
SE |
|
The University of Manchester |
Prof. Phil Withers |
UK |
|
ThermoFisher Scientific FEI SAS |
Dr. Ali Chirazi |
FR |
|
|
|
|
|
Associated Partners: |
|
|
|
Paul Scherrer Institute |
Ass. Prof. Marianne Liebi |
CH |
|
Teijin Aramid BV |
Dr. Enno Klop |
NL |
|
Xenocs SA |
Dr. Blandine Lantz |
FR |
|
Fiberline Composites A/S |
Ms. Atina Kafilzadeh |
DK |
|
Oxeon AB |
Mr. Andreas Martsmann |
SE |
|
Amsterdam Scientific Instruments BV |
Mr. Jord Prangsma |
NL |
|
Volvo Cars AB |
Prof. Renaud Gutkin |
SE |
|
Stichting Nederlandse Wetenschappelijk Onderzoek Instituten |
Dr. Tristan van Leeuwen |
NL |
|
EPFL – Ecole Polytechnique fédérale de Lausanne |
Dr. Marianne Liebi |
CH |
|
Cygnet Texkimp Limited |
Mr. Andrew Whitham |
UK |
|
GKN Aerospace |
Dr. Carolyn Oddy |
SE |
An idealized rendering of the real-time depth-resolved imaging (only an imagined single projection shown) and image cross section of fibre-composite material. The alignment and positioning of fibres and voids due to imperfect wetting by resin determines the mechanical properties, which may predicted by finite element modelling (lowest slice) based on the microstructural parameters.
Funded by the European Union. Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the European Research Executive Agency (REA). Neither the European Union nor the granting authority can be held responsible for them.